Elk in Rocky Mountain National Park
 

Property Information Methods

GetPropertyInfo

This method returns basic information about a property, such as owner name, location, etc.

Input

One of either arguments must have a value (both parameters must be included)

  • scheduleNum - Property Schedule Number, string
  • parcelNum - Property Parcel Number, string

Output

  • status - Status of Request: 0=success, 1=no data found, 2=error
  • message - Return Status Message
  • parcelNumber - parcel number
  • scheduleNumber - schedule number
  • address - property address
  • city - property city
  • zipCode - property zip code
  • legal - legal description
  • subdivId - subdivision ID
  • subdivDescr - subdivision description
  • accountType - account type
  • ownerName1 - owner name 1
  • ownerName2 - owner name 2
  • mailAddress1 - mailing address 1
  • mailAddress2 - mailing address 2
  • mailCity - mailing city
  • mailState - mailing state
  • mailZipCode - mailing zip code
  • lotSize - land square footage (added 11/30/2006)
  • lastSalePrice - last "arms length" sale price (added 11/30/2006)
  • lastSaleDate - last "arms length" sale date, "N/A" if none available (added 11/30/2006)

GetBuildingIds

This method returns an array of building Ids for the various buildings on a property. These building Ids can then be used with the GetImprovements method to get the improvement information for each building.

Input

One of either arguments must have a value (both parameters must be included)

  • scheduleNum - Property Schedule Number, string
  • parcelNum - Property Parcel Number, string

Output

  • status - Status of Request: 0=success, 1=no data found, 2=error
  • message - Return Status Message
  • building - array of building ID numbers

GetImprovements

This method returns improvement information for a particular building on a property.

Input

One of either scheduleNum OR parcelNum arguments must have a value (both parameters must be included)

  • scheduleNum - Property Schedule Number, string
  • parcelNum - Property Parcel Number, string
  • buildingId - Building ID, numeric (obtained from GetBuildingIds method above)

Output

  • status - Status of Request: 0=success, 1=no data found, 2=error
  • message - Return Status Message
  • propertyType - property type (e.g. Commercial, Residential)
  • occupancy - occupancy description< (e.g. Condo unit, Motel, Townhouse)
  • builtAs - built as (e.g. 2 Story, Cottage, Service Station)
  • squareFeet - total square feet
  • condoSquareFeet - condominium square feet
  • basementSquareFeet - basement square feet
  • basementFinishedSquareFeet - basement square feet finished
  • condition - condition (e.g. Average, Good, Excellent)
  • quality - quality (e.g. Average, Good, Excellent)
  • hvac - heating/air conditioning type (e.g. Air Exchange, Complete HVAC, Electric)
  • exterior - exterior (e.g. Cedar A-Frame, Frame Siding, Metal Siding)
  • interior - interior (e.g. Drywall, Paneling, Plaster)
  • unitType - unit type (e.g. End, Inside)
  • stories - number of stories
  • roofType - roof type (e.g. Flat, Gable, Shed)
  • roofCover - roof cover (e.g. Clay Tile, Concrete Tile, Shingle Comp)
  • foundation - foundation (e.g. 12 Concrete, 24 Block, Stone)
  • rooms - number of rooms
  • bedrooms - number of bedrooms
  • baths - number of baths
  • units - number of units
  • classDescr - class desription (e.g. Masonry, Wood Frame, Pole)
  • yearBuilt - year built
  • yearRemodel - year remodeled
  • garageSquareFeet - garage square feet (added 11/30/2006)

GetParcelsPerAddress

This method returns an array of parcel numbers for a given address. These parcel numbers can then be used with the other methods to get information for specific properties.

Input

  • streetNum - Street Number, string
  • streetDir - Street Direction, string (for streets with multiple directions, if blank, will get all regardless of direction; possible values: null, N, S, E, W, NE, NW, SE, SW)
  • streetName - Street Name, string
  • city - City, string (full spelling, e.g. FORT COLLINS)
  • streetNameSearchType - string, type of search for streetName, possible values: EQUAL - performs exact match, LIKE - performs like search for as many characters as supplied (added 1/3/2007)

Output

  • status - Status of Request: 0=success, 1=no data found, 2=error
  • message - Return Status Message
  • parcel - array of parcel numbers
Background Image: Rocky Mountain National Park by Sue Burke. All rights reserved.